*Applicable Win. 95 & 98 is Ver.4.30A (first editon) or later

The Software available to use 1 : MPE720 (now Ver.5.3)
__________Controller Type: NSC30/40/50 or later

The Software available to use 2 : CP717
__________Controller Type: NSC30/40

The Software available to use 3 : FA CONTROLLER "NSC10/20" PROGRAM DEVELOPMENT AID SYSTEM for DOS/V
__________Controller Type: NSC10/20



Hardware requirements:

======== MPE720 ===================================================================

Type 1: Hardware Serial Port RS-232C for NSC30/40 Controller + Ethernet modem connectivity for NSC50 Controller

Type 2: USB/Serial RS-232C Adapter Device for NSC30/40 Controller + Ethernet modem conectivity for NSC50 Controller

PC architecture ____ DOS/V
CPU ___ Pentium 200 MHz or better
Memory ___ 64MB minimum (128MB recommended)
Resolution ___ 800 x 600 pixels
Hard disk ___ 200 MB free space minimum



======== CP717 ====================================================================

Type 1: Hardware Serial Port RS-232C for NSC30/40 Controller

Type 2: USB/Serial RS-232C Adapter Device for NSC30/40 Controller

PC architecture ____ DOS/V
CPU ___ Punting 200 MHz or better
Memory ___ 64MB minimum (128MB recommended)
Resolution ___ 800 x 600 pixels
Hard disk ___ 200 MB free space minimum



=== FA CONTROLLER "NSC10/20" PROGRAM DEVELOPMENT AID SYSTEM for DOS/V ============

Hardware Serial Port RS-232C for NSC10/20 Controller
Main memory ___ 640K bytes minimum
Hard disk _____ 40M bytes free space minimum
Back up _______ Floppy disk